Bobbin Holder High Tension Yellow Dot For Machines With Automatic Thread Cutting System

This bobbin holder creates easy-to-adjust thread tension when embroidering with non-Janome bobbin thread. The bobbin holder is marked with a yellow dot has 20g tension. Note - Janome bobbin thread is finely tuned for use with the standard bobbin holder which is usually set at 10g tension for embroidery machines. Non-Janome bobbin thread tends to be thinner or less resistant than Janome bobbin thread so it may need more tension when embroidering.

This item can be  used on any machine that has the automatic thread cutter. MC15,000, M7, 3160QDC, 5300QDC, 4120QDC and so on.

This accessory works with the following models: